Electronics
Only the best of the best components used
Future proofing for years and years of reliability
1000's Pickguards by WD Music
Click on the WD Music Image to view the inventory
Potentionmeters by Bourns
Best quality pot I've ever used, Smooth audio taper, Available in 250k, 500k, solid, & spline shaft
Potentiometers 250k vs. 500k
- 500K-ohm pots are used with humbuckers
- 250Ks are used with single-coil pickups.
- 25K pots are used for active systems.
The higher the resistance, the warmer the tone. This is for both the pots and the tone cap.
This is all personal choice, and all depends on the pickups, guitar, and amp you use.
CHECK OUT SCOTT'S REVIEW ON CHANGING POT VALUES

"RS GuitarCaps® are the first caps designed specifically for the electric guitar rather than general electronics use. For this reason the caps are made to be 100% transparent to let every bit of your guitar's natural tone shine through.
This will give you dynamics you have never heard before while still giving you that special ""Woman Tone"", but without ever losing clarity or getting muddy. The best part is, unlike all the other high end audio caps on the market, these caps are 100 volt so they are very small. This makes installation simple even in the tightest control cavity.
.jpg)
Multiple sounds and switching options
Coil Splitting
4-conductor humbuckers, can perform all kinds of coil splitting to maximise the number of tone possibilities … coil tap, parallel, in phase, out of phase,
Note:
Coil tap (turns off one of the coils sounds more strat like single coil mode so no longer humbucking, noise is introduced)
Note: Future proofing =
Heat shrink applied over the connected contact, strengthens the connections, inhibits corrosion, contacts touching and shorting out, for years and years of reliability.
So often people change pickups to improve their tone. I recommend, in Korean, Chinese, guitars, to replace the pots, jack, switch and wire as well. These inferior components, can kill tone, and have a far shorter life span.




.png)